EPDM solitary side fabric composite water-resistant membrane
It can be pasted onto the cement floor right.
EPDM water-resistant membrane is created from ethylene propylene diene monomer (EPDM), introducing into some chemical auXiHu (West Lake) Dis.liaries, for example, carbon black, nanophase modifier, plasticizer, vulcanization accelerator and other individuals, it is 1 variety of polymer watertight membrane with superb overall performance elasticity.
| Thickness(mm): | one.2mm, 1.5mm, 2.0mm |
| Allowable deviation(%): | -ten to +15 |
| width(mm): | one thousand, 1200 |
| Size / roller: | 1200mm or Customized by the buyers’ requirments. |
Specification:
| No. | Things | JL1 | JL2 | |
| one | Tensile Power (MPa) | 23 ordmC | ge7.five | ge4. |
| 60 ordmC | ge2.3 | ge0.8 | ||
| 2 | Breaking EEPTation | 23 ordmC | ge450% | ge400% |
| -20 ordmC | ge200% | ge200% | ||
| three | Tear Strength kN/m | ge25 | ge18 | |
| 4 | EPTermeability, .3Mpa, thirty minutes | No leaking | No leaking | |
| five | Lower Temperature FleXiHu (West Lake) Dis.bility | -40 ordmC | -thirty ordmC | |
| six | Thermal Stability (mm) | Increase | le2 | le2 |
| Shrink | le4 | le4 | ||
| 7 | Very hot Air Ageing (80 ordmC times168h) | Tensile Retention | ge80% | ge90% |
| Breaking EEPTation Retention | ge70% | ge70% | ||
| eight | Alkali Resistance, Saturated Ca(OH)two Answer, 23 ordmC times168h | Tensile Retention | ge80% | ge80% |
| Breaking EEPTation Retention | ge80% | ge90% | ||
| 9 | Ozone Getting older(40 ordmC times168h) | EEPTation forty%, 500pphm | No crack | No crack |
| ten | Artificial Weathering Growing older | Tensile Retention | ge80% | ge80% |
| Breaking EEPTation Retention | ge70% | ge70% | ||
| eleven | Bonding Peel Toughness (Sheet and Sheet) | N/mm (StXiHu (West Lake) Dis.Hu (West Lake) Dis.rd Test Situations) | ge1.five | ge1.five |
| Soaking Retention Charge(23 ordmC times168h) | ge70% | ge70% | ||
Functions
1) It can be used to the cement fundation immediately.
2) Good climate fastness and dimensional stability.
three) Exceptional efficiency to substantial and low temperature (-forty ordmC ~ +eighty ordmC), EPTresistant and anti-corrosion.
four) Increased tensile toughness and far better extensibility unEPTnormal construction conditions.
5) Straightforward installation, sound joint, and no environmental pollution.
six) Great rooting penetration resistance.
Software:
one) Roofs, basement, bathroom, bridge, underground, tunnel and dam.
2) EPT and civil creating water-resistant.
three) Geo-synthetic liner for swimming pool, channels, irrigation system
4) EEPTly for tasks with large needs in toughness, anti-corrosion and deformation.
Building Approach:
one). Make sure all area are clean,dry and dust-free. Eliminate any unfastened particles and any rust with a wire brush amp delicate broom.
2).Roll out the membrane.
3).Get rid of the backing paper and spot the adhesive aspect to the formerly well prepared surface area.
4).To make sure a tigEPT get in touch with-smooth the EPT down with a dry fabric, remocing all the air bubbles
5).Push the EPT to the surface firmly as soon as in position.
6).Easy flat all edages with a wallpaper roller or trowel.
7).Following use reseal pack and store uprigEPT in cool,dry condition.
Storage and Transportation:
1) Waterproof resources must be stored unEPTdry and ventilated conditions.
two) Diverse varieties of membranes should be piled separately.
three) UnEPTusual problem, storage period of time is a single year considering that creation date.
four) Waterproof resources need to be set vertically throughout transportation.
5) It ought to be held absent from sunshine and rainwater.
6) Transport and storage method should be absent from the hearth supply, storage temperature does not exceed 35 ordmC, the storage time period is one 12 months.
