scrap tyre recycling EPT rubber powEPTproduction line
The EPT tire recycling EPT will be managed by the PLC, all the supplies will be process inside of of EPTs, there is Real ZERO Pollution. one labor, one engineer can run all the EPTs, no need to have to run the EPTs, just management the PLC. the EPTs can defend the EPTs, operate the EPTs and preserve the EPTs work effortlessly.
Specification
1.Tire shredEPTEPT
The Rubber ShredEPTEPT undertake PLC computerized handle program, with automated reversal handle program in overload problem. Two-shaft tire crusher is EPTly created for aged tires with lower velocity and higher torque to reduce noise and EPT consumption.
The blade of the shredEPTis made of large good quality metal and subjected to Bodycote warmth treatment method to attain the greatest crushing functionality.The shredEPTis straightforward to disassemble and modify cutter blade and suited for tearing massive, added thick and hard supplies.The thickness range of the crushing blade is 25mm-152mm in accordance to the tire sort,output and last solution. The grinEPTcan procedure OTR tires,huge truck tires,automobile tires and so on at the velocity of one-30tons whithin 1 hour.
| Design | Input measurement | Output dimensions | Cappacity | Motor | Blades amount | Proportions | Fat |
| TS-800 | 800mm | fifty*50mm | 1-2T/h | 2*22kw | 16pcs | 4*two.six*three.2m | 8T |
| TS-1200 | 1200mm | 60*60mm | 3-5T/h | two*37kw | 20pcs | four.8*two.8*three.5m | 14T |
| TS-1600 | 1600mm | fifty-150mm | 6-8T/h | 2*45kw | 16-30pcs | five*two*3.4m | 18T |
| TS-1800 | 1800mm | 50-150mm | seven-10T/h | two*55kw | twenty-24pcs | 5.six*two*three.4m | 23T |
| TS-2000 | 2000mm | 75-200mm | ten-15T/h | two*75kw | twenty-30pcs | six*two.4*4m | 36T |
| TS-2400 | 2400mm | 100-200mm | 20-30T/h | two*110kw | sixteen-24pcs | 7.four*3.2*five.2m | 56T |
two.Rasper
EPT tire shredding system is designed to generate up to six tons for each hour of wire free of charge rubber mulch.This program produces up to a ninety nine% wire free chip ranging in size amongst twelve-25mm dependent on the preferred size.After processing,the metal is eliminated by our magnetic separation system.At this stage,the wire free rubber chips are prepared to be coloured and employed for landscaping mulch and the steel is all set to be baled and bought to smelters.
| Rasper | Motor | EPT | Potential | Dimensions | Excess weight | Cutting chamber | Ultimate merchandise |
| R45 | Siemens | 45KW | three hundred-500kg/H | 1.4*1.two*two.3m | 1700kg | 450*600mm | 10-30mm |
| R55 | Siemens | 55KW | five hundred-700kg/H | one.7*1.seven*2.3m | 1850kg | 450*800mm | 10-30mm |
| R75 | Siemens | 75KW | 700-1T/H | 2*two*four.1m | 3500kg | 550*800mm | ten-30mm |
| R90 | Siemens | 90KW | 1-1.5T/H | two.1*two.1*four.1m | 4200kg | 550*1000mm | ten-30mm |
| R132 | Siemens | 132KW | 1.5-3T/H | two*2.five*four.1m | 6100kg | 742*1200mm | 10-30mm |
| R315 | Siemens | 315KW | 3-6T/H | 6.2*2.1*3.6m | 12400kg | 697*1562mm | ten-30mm |
three.Granulator EPT
Waste Tire Recycling Rubber Granule Creating EPT is adopting bodily recycling approach and is created to grind the rubber mulch from the rasper into modest granules as fine as one-6mm. The granules are screened and re-circulated until the preferred dimensions is attained. This Totally-Automatic Tyre Recycling Line operating in standard temperature, no require to add any other chemical compounds, no air pollution to the environment. This is the greatest way to recycling scrap tires.
| Granulator | G37 | G45 | G90 |
| Motor | Siemens | Siemens | Siemens |
| EPT | 37kw | 45kw | 90kw |
| Ability | three hundred-500kg/h | 500-800kg/h | 800-1500kg/h |
| Proportions | 1.eight*1.6*2.4m | one.eight*one.9*2.4m | two.2*two.3*3m |
| Final solution | one-6mm | one-6mm | 1-6mm |
four.Miller
Rubber powEPTis the final outcome of ambient tire recycling.At this phase,crumb rubber is ground down into a clean powEPTform with virtually all metal and fiber eliminated.Rubber powEPThas several secondary employs from injection molding products,coatings,roofing components and a variety of asphaltapplications.
Rubber powEPTis typically found in forty-seventy four microns(.40-.74mm) in measurement.This micron size metarial has the gain of being incorporated into new or eXiHu (West Lake) Dis.sting formulations for a variety of polymers and concluded merchandise.
| Rubber powder | M2000 | M1500 | M1000 | M500 |
| Enter product | Large duty truck tyres to bicycle tyres | |||
| Enter dimension | Diameter 1800mm | Diameter 1800mm | Diameter 1800mm | Diameter 1800mm |
| Output measurement | shred to thirty-120 mesh rubber powder | |||
| Capacity | 2000kg/h | 1500kg/h | 1000kg/h | 500kg/h |
| Whole Kw | 680-760kw | 516-556kw | 347-372kw | 170-190kw |
Mob 151366 0571 6
FAQ:
Q1,Are you a manufacturing facility or a buying and selling firm?
A. We are a producer with thirty years manufacturing knowledge in tire recycling EPT. We have export license, we can supply you the manufacturing facility prices.
Q2. Can you ensure the capability as you talked about ?
A. Absolutely indeed,except that,we also provide 3-5years warranty.
Q3, are you sure the last rubber powEPTcan be completely clean out of wire metal or nylon ?
A. The last powEPTpurity can attain 99.9%. we have magnetic separator which can different the wire metal from the rubber powder.
