
Waste tire recycling EPT/Tire crusher/Crumb rubber EPT
Waste tire recycling EPT is to crush squander tires into rubber powEPTin diverse measurements. The final rubber powEPTis with purity of ninety nine.ninety nine%, can be employed to make rubber tiles, rubber mat, asphalt, water-resistant materials, filler of synthetic grass.
The working process of waste tire recycling crumb rubber EPT is:
waste tire—tire circle cutter—tire strip cutter—tire slice cutter—rims separator—rubber crusher—magnetic separator—fiber separator—rubber powder
Specification of waste tire recycling EPTs:
one. Tire circle cutter is utilised to cut and open the joint of tire’s facet and top.
|
Title |
Motor EPT |
Excess weight |
Ability |
Tire specification |
|
Tire circle cutter |
4kw |
650kg |
40pcs/h |
650-1200mm (The two strengthened and nylon tires) |
two. Rims separator is utilized to individual the metal rims close to the tire to keep away from the hurt to the EPT.
|
Name |
Motor EPT |
Weight |
Potential |
|
Rims separator |
7.5kw |
1300kg |
100pcs/h |
3. Tire strip cutter is used to reduce the tire cirlce into strips 5×8 cm .
|
Identify |
Motor EPT |
Bodyweight |
Capability |
Chopping measurement |
|
Tire strip cutter |
4kw |
850kg |
two.5t/h |
5x8cm |
4. Tire slice cutter is employed to lower the strips into small chunks about three.five cubic centimeter.
|
Title |
Motor EPT |
Bodyweight |
Potential |
Reducing dimensions |
|
Tire slice cutter |
4kw |
800kg |
.8t/h |
3x5x8cm |
five. Principal rubber crusher is to crush the rubber blocks into powEPTin diverse dimensions with purity of ninety nine.99%.
| Design | Capability | Drum diameter | Drum length | Entrance roll linear | Roll speed ratio | Max roller spacing | Motor EPT |
| XKP-350 | 3ton | 300mm | 500mm | 26.2m/min | 1:two.five | 8mm | 37kw |
| XKP-four hundred | 6ton | 400mm | 600mm | 34.5m/min | 1:two.five | 8mm | 45kw |
| XKP-450 | 8ton | 450mm | 760mm | 38.0m/min | 1:2.five | 8mm | 55kw/75kw |
| XKP-560 | 10ton | 560mm | 800mm | 38.6m/min | one:two.five | 8mm | 75kw/90kw |
| XKP-560D | 20ton | 560mm | 1000mm | 42.5m/min | 1:2.5 | 8mm | 132kw/160kw |
Rewards of our rubber crusher EPT:
1. Crusher roller velocity ratio: Ours is one: 2.5, while the previous variety roller pace ratio is one: 1.38.
2. Roller framework: Our two rollers are equally grooved, which enhance the friction and then improve the output, although the outdated variety is one particular with groove, and the other is clean.
three. Roller material: The roller is made by Welding put on resistant alloy materials, 5Cr6MnMo. We can offer you 3 a long time warranty of the roller. Although the old kinds EPT use cast iron to make the rollers, quite straightforward to break or crack in two .
4. EPT attribute: Our EPT is strength preserving one/three. For illustration, producing 1T powder, our EPT electricity intake is only a hundred and fifty deg, although their electrical power usage is about 250- 280 deg in making 1T powder.
five. Bearing: Our EPT use rolling bearing, there are 8 pieces bearing within, even though the aged EPT use the slide bearings ( bush) , which is not as excellent as ours.
For much more data, you should really feel cost-free to contact us anytime.
/Mobile: 15738242977

